Original Cisco WS-C2960XR-48TD-I 2960-XR 48 GigE, 2 x 10G SFP+, IP Lite Switch
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
PoE+ support with a power budget of up to 740W and Perpetual PoE
Cisco IOS LAN Base[1] or LAN Lite1 and Cisco IOS IP Lite[2]
Device management with web UI, over-the-air access via Bluetooth, Command-Line Interface (CLI), Simple Network Management Protocol (SNMP), and RJ-45 or USB console access
Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
Stacking with FlexStack-Plus and FlexStack-Extended
| Part number | 10/100/1000 Ethernet interfaces | Uplink interfaces | Cisco IOS Software feature set | Available PoE power | Second FRU power supply option | FlexStack-Plus, FlexStack-Extended |
| WS-C2960XR-24PD-I | 24 | 2 SFP+ | IP Lite | 370W | 640W | Optional |
| WS-C2960XR-48TD-I | 48 | 2 SFP+ | IP Lite | – | 250W | Optional |
| Product number | WS-C2960XR-48TD-I |
| Enclosure type | |
| Rack-mountable - 1U |
| Ports | 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
Network management
Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | None |
Forwarding
bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80G |
| Forwarding Performance | 130.9Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 512MB |
| Flash Memory | 128MB |
| Status Indicators | Per-port status: Link integrity, disabled, |
| activity, speed, and full duplex |
| |
| System status: System, RPS, Stack link status, |
| link duplex, and link speed |
Product Tags:
|
|
IP Lite Cisco Gigabit Switch Original WS-C2960XR-48TD-I 2960-XR 48 GigE 2 X 10G SFP+ Images
|
